Co Line Call Limitation - Panasonic KX-NS700 Feature Manual

→Single CO Line Access
10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—Line Hunting Order
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→Type
→Parameter Selection (for Single CO)
→Parameter Selection (for Group CO)
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
→Type
→Parameter Selection (for Single CO)
→Parameter Selection (for Group CO)
16.1 PBX Configuration—[8-1] ARS—System Setting—ARS Mode
18.1 PBX Configuration—[10-1] CO & Incoming Call—CO Line Settings—CO Name
PT Programming Manual References
[400] LCOT CO Line Connection
[401] LCOT CO Line Name
[409] LCOT CO Line Number Reference
[500] Trunk Group Number
Feature Manual References
4.1.22 COS (Class of Service)
7.1.3 Flexible Buttons
Operating Manual References
1.2.1 Making Calls

4.1.17 CO Line Call Limitation

Description
CO line calls are limited by the following features:
Feature
Extension-to-CO Line Call
Duration
CO-to-CO Line Call (except
Unattended Conference Call)
Duration
Document Version 2017-06
If a call between an extension user and an outside party is
established, the call duration can be restricted by the system timer
selected for each trunk group. Both parties will hear warning tones at
five-second intervals starting 15 seconds before the time limit.
the time limit expires, the line will be disconnected. COS
programming determines whether this feature is enabled or disabled.
Whether this feature applies to outgoing calls only, or to both
outgoing and incoming calls is determined through system
programming.
If a call between two outside parties is established, the call duration
can be restricted by the system timer selected for each trunk group.
Both parties will hear warning tones at five-second intervals starting
15 seconds before the time limit.
line will be disconnected.
If both parties involved in the CO-to-CO line call were established by
an extension (e.g., an extension makes a CO line call, then transfers
the call to an outside party), the time limit applied to the CO line call
that was made first will be used.
4.1.17 CO Line Call Limitation
Description
When the time limit expires, the
*1
When
*1
Feature Manual 71