Special Carrier Access Code - Panasonic KX-NS700 Feature Manual

18.1.9 Special Carrier Access Code

Conditions
•
Through system programming, it is possible to enable or disable this feature.
•
Up to 2 SNMP managers can be assigned.
•
This PBX supports SNMP Protocol Version 1.0, 2.0c and SNMP Version 1.0-TRAP.
•
This PBX can only receive read-only MIBs. Write MIBs are not supported.
•
This PBX supports MIB II.
•
For more information regarding major and minor alarms, refer to the Installation Manual.
•
For a list of the MIB object groups supported by this PBX, refer to 23.4 Supported Management
Information Base (MIB) Table in the Appendix.
•
Through system programming, it is possible to select whether each type of TRAP (e.g., ColdStart) is sent
to the SNMP manager or not.
Installation Manual References
7.1.5 Troubleshooting by Error Log
PC Programming Manual References
27.3.3 Network Service—[3-3] Client Feature—SNMP Agent
Feature Manual References
12.1.4 Local Alarm Information
18.1.9 Special Carrier Access Code
Description
If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through
system programming is required every time a CO line call is made without using ARS.
A pause of a preprogrammed length will be automatically inserted between the user-dialed Special Carrier
Access code and the subsequent digits. (→ 15.1.3 Pause Insertion)
Conditions
•
TRS
Toll Restriction (TRS) checks only the dialed telephone number excluding the Special Carrier Access
code. (→ 19.1.5 TRS (Toll Restriction))
•
ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits
when ARS mode is enabled. (→ 2.1.3 ARS (Automatic Route Selection))
•
If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately—these
codes cannot be assigned together as one code. (→ 9.1.5 Host PBX Access Code (Access Code to the
Telephone Company from a Host PBX))
PC Programming Manual References
15.3 PBX Configuration—[7-3] TRS—Special Carrier
PT Programming Manual References
[303] Special Carrier Access Code
348 Feature Manual Document Version 2017-06