Panasonic KX-NS700 Feature Manual page 247
Hybrid ip-pbx
Hide thumbs
Also See for KX-NS700:
- Feature manual (580 pages) ,
- User manual (394 pages) ,
- Operating manual (362 pages)
Table of Contents
Advertisement
Features
Wireless XDP
Parallel Mode
Conditions
[APT + SLT]
•
If one telephone goes off-hook while the other is on a call, a three-party call is established. If one user
goes on-hook, the other user continues the call.
•
An extension user cannot originate a call from the SLT if the APT is:
–
playing background music (BGM)
–
receiving a paging announcement over the built-in speaker.
•
Both the APT and the SLT will ring for incoming calls, and the PBX cannot refuse calls arriving at the SLT.
[DPT + SLT]
•
It is programmable whether to have the DPT and SLT in either parallel or XDP mode. Regardless of the
mode, the SLT can be connected directly to the XDP port of the DPT or to a modular T-adapter with the
DPT.
•
When in parallel mode, it is programmable whether the SLT rings for incoming calls.
Ring on: Both telephones ring except when the PT is in Hands-free Answerback mode (→ 9.1.1 Hands-
free Answerback) or voice-calling mode (Alternate Receiving Ring/Voice) (→ 10.1.14 Intercom Call).
Ring off: Only the PT rings. However, the SLT can answer the call.
•
Both telephones cannot engage in calls simultaneously. If one telephone goes off-hook while the other is
on a call, the call is switched to the former. The call is not switched in the following cases:
a.
While receiving OHCA (→ 14.1.3 OHCA (Off-hook Call Announcement)) or Whisper OHCA. (→
22.1.5 Whisper OHCA)
b.
During a Conference call (→ 4.1.18 Conference).
c.
While Live Call Screening (LCS) is activated (→ 21.1.4 Voice Mail DPT (Digital) Integration).
[DPT + DPT]
•
Capable Telephones
KX-DT300 series, KX-DT500 series, and KX-T7600 series, except KX-T7640. Note that the KX-T7667
can only be connected as a slave DPT.
•
When using Digital XDP connection, the following features cannot be used with either the master or slave
DPT:
a.
OHCA: A call waiting tone will be heard even if the OHCA feature is set.
Document Version 2017-06
Descriptions
For this connection, refer to 22.1.6 Wireless XDP
Parallel Mode.
15.1.2 Paralleled Telephone
Connections
APT/DPT/SLT + PS
PBX
PT
Extn. 101
PS
Extn. 101
SLT
Extn. 102
PS
Extn. 102
Feature Manual
247
Advertisement
Table of Contents
