Panasonic KX-NS700 Feature Manual page 81

–
When an extension user receives an incoming call, detailed caller information can be displayed on the PC
automatically.
A PC and CTI server application software, such as Panasonic Communication Assistant (CA), are required
to use CTI features. The PC running the application monitors the status of the PBX and controls the PBX via
the CTI Server.
[Example]
PBX
Mother
Board
PC
Conditions
•
CTI application software must be installed on the connected PC. In addition, KX-NSF101 (Activation Key
for CTI interface) is required to use CTI applications other than CA.
•
CTI support for SIP extensions is available only for KX-UT series SIP phones.
•
Application Programming Interface (API)/Protocol
Third Party Call Control
•
Only one CTI server can connect to the PBX at a time.
•
For details about specific CTI features, refer to the manual for your CTI application software.
•
When using a Panasonic TSP, refer to "Before Installing" in the KX-series TSP Installation Manual.
Installation Manual References
4.10 Connection of Peripherals
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Dial Information (CTI)
10.9 PBX Configuration—[2-9] System—System Options—Option 6 (CTI)
Document Version 2017-06
CTI Server
LAN
PC
LAN
Type
4.1.24 CTI (Computer Telephony Integration)
•
ECMA CSTA Phase 3
•
TAPI 2.1
API/Protocol
Feature Manual 81