Panasonic KX-NS700 Feature Manual page 283

Extn.1000
:
Extn.1999
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a
busy tone. If required, Intercept Routing can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
→ 10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—Incoming Call Inter-digit
Timer—DDI / DID (s)
PC Programming Manual References
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System Property—Main
→V-IPGW–GW Settings–Main
→V-IPGW–DN2IP
9.11.2 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW—Hunt Pattern
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Network Numbering Plan—
Trunk Property
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—Incoming Call Inter-digit
Timer—DDI / DID (s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→Idle Line Access (Local Access)
→Trunk Group Access
→TIE Line Access
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Other PBX Extension
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—TRS—TRS Level—Day,
Lunch, Break, Night
10.9 PBX Configuration—[2-9] System—System Options—Option 4—Private Network—TIE Call by
Extension Numbering
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—COS
17.1 PBX Configuration—[9-1] Private Network—TIE Table
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
→DIL—Trunk Property
→DIL—DIL Destination—Day, Lunch, Break, Night
→DDI / DID / TIE
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—DDI / DID Destination—Day,
Lunch, Break, Night
18.4 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous—Intercept—Routing to Operator - No
Destination (Destination is not programmed.)
PT Programming Manual References
[453] DID Destination
[500] Trunk Group Number
Document Version 2017-06
PBX-1
(A) Master
QSIG Network
(B) Master
(B) Slave
PBX-3
15.1.13 PRIVATE NETWORK FEATURES
PBX-2
(A) Slave
(C) Slave
(C) Master
Extn. 3000
:
Extn. 3999
Extn. 2000
:
Extn. 2999
Feature Manual 283