Automatic Callback Busy (Camp-On) - Panasonic KX-NS700 Feature Manual

2.1.4 Automatic Callback Busy (Camp-on)

PC Programming Manual References
6.5 Tool—Import
→ARS - Leading Digit
→ARS - Except Code
→ARS - Routing Plan
6.6 Tool—Export
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension
Inter-digit (s)
10.9 PBX Configuration—[2-9] System—System Options—Option 3—Dial Tone—Dial Tone for ARS
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 1—ARS
Itemized Code
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 1—ARS
Itemized Code
14.3 PBX Configuration—[6-3] Feature—Verification Code—Itemized Billing Code for ARS
16 PBX Configuration—[8] ARS
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—Option—ARS Dial
PT Programming Manual References
[320] ARS Mode
[321] ARS Leading Number
[322] ARS Routing Plan Table Number
[325] ARS Exception Number
[330] ARS Routing Plan Time Table
[331–346] ARS Routing Plan Table (1–16)
[347] ARS Routing Plan Table (1–48)
[350] ARS Carrier Name
[351] ARS Trunk Group for Carrier Access
[352] ARS Removed Number of Digits for Carrier Access
[353] ARS Carrier Access Code
Feature Manual References
23.1 Capacity of System Resources
2.1.4 Automatic Callback Busy (Camp-on)
Description
If the line is busy when a call is made, a callback ring can inform the caller when the line becomes free.
If the called party was another extension, or if the dialed number is handled by Automatic Route Selection
(ARS), the number is automatically redialed after the extension user answers the callback ring.
Conditions
•
If the callback ring is not answered within 10 seconds, callback is canceled.
•
If the extension hears a busy tone before dialing the telephone number, only the CO line or trunk group is
reserved. After answering the callback ring, the extension should dial the telephone number.
•
An extension can set only one Automatic Callback Busy. The last setting is effective.
•
Multiple extension users can set this feature for the same CO line at the same time.
However, a maximum of four extension users can set this feature to one extension.
Callback ringing will be sent to extensions in the order that the feature was set. In other words, the
extension that set the feature first will receive a callback ringing first.
30 Feature Manual Document Version 2017-06