Panasonic KX-NS700 Feature Manual page 429

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

VM (DTMF)
Group No.
1
2
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
[Programming Example of VM (DPT) Group]
VM (DPT) Group No.
1
2
→11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings—Floating Extension No.
*1
→[660] UM Group Floating Extension Number
→11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings—Group Name
*2
2.
Incoming Calls to VM Group
When incoming calls are received at the floating extension number of the VM group, calls will hunt
starting at the lowest VM port number. In this case, the FWD and DND settings (→ 7.1.7 FWD (Call
Forwarding), 5.1.13 DND (Do Not Disturb)) for each extension port are disregarded.
It is programmable whether the calls queue when all extension ports in the group are busy through
system programming. If the queuing is disabled through system programming, the call will be
redirected to the intercept destination of the head member extension of the VM (DPT) group.
Conditions
It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directly to
the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting) on
the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on the
extension.
One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialing button for direct access to a Voice Mail feature. (→
14.1.6 One-touch Dialing) For example, to access a mailbox (mailbox number 123) of the VPS (extension
number 165) directly, assign "165#6123" to a One-touch Dialing button. When pressing this button, the
outgoing message (OGM) of the mailbox will be heard.
All ports in a VM (DPT) group must be connected to a single DHLC or DLC card.
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
→DPT Type—Type
→DPT Type—VM Unit No.
→DPT Type—VM Port No.
11.11.1 PBX Configuration—[3-11-1] Group—VM(DPT) Group—System Settings
11.11.2 PBX Configuration—[3-11-2] Group—VM(DPT) Group—Unit Settings
11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF) Group—System Settings
11.12.2 PBX Configuration—[3-12-2] Group—VM(DTMF) Group—Group Settings
PT Programming Manual References
[601] Terminal Device Assignment
[660] UM Group Floating Extension Number
Document Version 2017-06
Floating
Group
Extension
Name
No.
300
Company C
400
Company D
Floating Extension No.
500
200
Extension No. of
Service
Port Connected to
VPS Port
Mode
1
2
AA
301
302
VM
401
402
1
2
Group Name
*
*
Company A
Company B
21.1.3 Voice Mail (VM) Group
...
...
...
Feature Manual
429

Advertisement

Table of Contents
loading

Table of Contents