Panasonic KX-NS700 Feature Manual page 438

21.1.5 Voice Mail DTMF Integration
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be
redirected to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are
intercepted so that the caller can be directed to an extension rather than a mailbox. This can be
performed by selecting "AA" through system programming.
→ 11.12.1 PBX Configuration—[3-12-1] Group—VM(DTMF) Group—System Settings—Others—
Intercept Routing to the VPS Sequence
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
CO Line Call
Operator
c.
Voice Mail (VM) Transfer Button
By pressing the Voice Mail (VM) Transfer button during a call, an extension user can transfer a
call to a mailbox of the VPS so that the caller can leave a message in the mailbox of the desired
extension. When the extension user presses this button and enters the desired extension number,
the PBX will transfer the call to the VM group and dial the mailbox number of the desired
extension with the required command (after the VPS answers the call). Therefore the caller can
leave a message without knowing the mailbox number.
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button
→
Type
→
Extension Number (for Voice Mail Transfer)
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button
→
Type
→
Extension Number (for Voice Mail Transfer)
12.3 PBX Configuration—[4-3] Extension—DSS Console
→
Type
→
Extension Number (for Voice Mail Transfer)
438 Feature Manual
Parameter
Switching to VM command +
Recording message command
(#6 + H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
PBX
Transfer
Extn. 102
Transmitted Command
In AA Service Mode
Sent "#6" + "102".
Switching to VM command
FWD, Intercept
VPS (In AA service mode)
VM Port 1
VM Port X
In VM Service Mode
Recording message command
(H [H = Mailbox No.])
Switching to AA command (#8)
mailbox number
VM Port 2
VM (DTMF)
Group
VM Port 3
Document Version 2017-06