Ip-Cs (Kx-Ns0154) - Panasonic KX-NS700 Feature Manual

Feature Manual References
4.1.22 COS (Class of Service)

10.1.16 IP-CS (KX-NS0154)

Description
The KX-NS0154 is an IP-CS that supports many network features supported by IP-PTs. It also supports 2
types of signal synchronization.
Easy Setup
This IP-CS can be automatically registered to the PBX by connecting it to the network.
For details, refer to "5.8.1 Registering IP Telephones" in the Installation Manual.
It also supports remote connectivity with the Media Relay Gateway feature.
For details, refer to "5.8.4 Installing IP Phones at a Remote Site with a Built-in Media Relay Gateway" in the
Installation Manual.
Synchronization Methods
CSs can synchronize their communication frames in order to enable handover when a PS user moves
between coverage areas of different CSs. There are 2 types of synchronization: air synchronization and LAN
synchronization.
In air synchronization, CSs synchronize frames wirelessly. In LAN synchronization, CSs synchronize frames
over a LAN. LAN synchronization has the benefit of providing synchronization, even if wireless
communication is not possible or reliable between CSs.
For details about configuring synchronization, refer to the documentation for the CS.
Automatic Rerouting to a Secondary PBX
By assigning the IP address of a secondary PBX, if the CS loses its connection to the primary PBX, it
automatically switches its connection to the secondary PBX to continue operation.
Statistics and Diagnostics
The IP-CS compiles statistics about its performance for diagnostic purposes. The following logs can be
viewed in Web Maintenance Console:
•
IP-CS statistics for wireless channel and air synchronization
→ 7.5.5.1 Utility—Report—IP-CS Information—IP-CS Statistical Information
•
LAN Sync Group performance statistics
→ 7.5.5.2 Utility—Report—IP-CS Information—LAN Sync Information
•
PS Call Disconnect Log
→ 7.5.5.3 Utility—Report—IP-CS Information—PS Call Disconnect Log
Conditions
[General]
•
For details about setting up and operating the IP-CS, refer to the documentation of the IP-CS.
•
If the number of DSP resources is insufficient for handling calls, the CS operates in the same way as
when it does not have any available channels.
For details about DSP resources, see "5.1.18 DSP Resource Usage".
•
For the KX-NS0154, encryption between the CS and PSs can be enabled by specifying Optional for the
CS Repeater Mode setting. However, the following conditions must be met:
–
DECT Repeater: KX-A406 SUFFIX B or later
–
KX-NS0154 firmware version: 02.xxx or later
If these conditions are not met, Normal must be specified for the CS Repeater Mode setting.
Document Version 2017-06
10.1.16 IP-CS (KX-NS0154)
Feature Manual 207