Panasonic KX-NS700 Feature Manual page 70

4.1.16 CO Line Access
Method
S-CO Line Access
Conditions
•
Class of Service (COS) programming determines the trunk groups available for making calls.
•
CO Line numbers can be referred on a CO line port basis.
•
Button Assignment
A flexible button can be customized as a G-CO, L-CO, or S-CO button as follows:
Type
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
It is possible to assign:
–
the same CO line to the S-CO button and to a G-CO button.
–
the same trunk group to more than one G-CO button.
–
more than one L-CO button.
Dialing the CO Line Access number selects a CO button according to the following priority: S-CO → G-
CO → L-CO
•
Direct CO Line Access
If an extension user is on-hook when pressing an idle CO button, the proprietary telephone (PT)
automatically enables hands-free operation mode. The user can dial without lifting the handset or
pressing the SP-PHONE button or MONITOR button.
•
Group Hunting Order for Idle Line Access
An idle CO line is selected from the trunk groups assigned for Idle Line Access. If multiple trunk groups
are available, the trunk group hunting sequence can be determined through system programming.
•
CO Line Hunting Order for Idle Line Access and Trunk Group Access
The CO line hunting sequence in a trunk group (from lowest numbered CO line, from highest numbered
CO line or rotation) can be determined through system programming.
•
A company name or customer name can be assigned on a CO line port basis so that the operator or
extension user who is answering the call can view the destination which the caller is trying to reach before
answering. This is useful, for example, when multiple companies share the same operator.
•
It is possible to identify the CO line port that has a CO line connected to it. This prevents extension users
from originating a call to a CO line which is not connected.
PC Programming Manual References
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type—Connection
9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—Port Type
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Connection
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→Idle Line Access (Local Access)
→Trunk Group Access
70 Feature Manual
Description
Selects the desired CO line
directly.
Any trunk group that is made available for Idle Line Access through
system programming is applied.
A trunk group is assigned.
A specified CO line is assigned.
Operation
Dial the S-CO Line Access number
and the CO line number, or press the
S-CO button.
Assignable parameter
Document Version 2017-06