Panasonic KX-NS700 Feature Manual page 198

10.1.11 INCOMING CALL FEATURES
Distribution Method
Direct Inward Dialing
(DID)
Calling Line Identification (CLI) distribution is the most customizable call distribution method available.
It allows calls from specific people to be directed to specific destinations, based on the callers'
telephone numbers. CLI distribution, when enabled for the current time mode, takes precedence over
DIL or DID distribution.
Distribution Method
Calling Line
Identification (CLI)
Distribution
3.
Available Distribution Method for Public CO Lines
Card
Type
Mother Board
(V-IPGW)
Mother Board
(V-SIPGW)
LCOT
PRI
: Default
: Available
4.
Available Destination
The following destination types can be programmed as DIL, DID, or CLI destinations.
Wired Extension (PT/SLT/SIP Extension)
PS
ICD Group
PS Ring Group
UM Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
198 Feature Manual
Directs a call received on a DID line to a
preprogrammed destination based on the
telephone number dialed by the caller.
Directs a call to its preprogrammed destination if
the caller's telephone number and its CLI
destination has been stored in the System
Speed Dialing Table.
Distribution Method
Port/Channel
Type
DIL
CO
Destination Type
Description
Description
DID
Details in
→ 5.1.7 DID (Direct
Inward Dialing)
Details in
→ 4.1.14 CLI
(Calling Line
Identification)
Distribution
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Document Version 2017-06