Intercept Routing-No Destination - Panasonic KX-NS700 Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

→ 12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Intercept No
Answer Time—Intercept No Answer Time—Day, Lunch, Break, Night
The Intercept Routing destination for each time mode will not apply for Intercept Routing—Busy. When
the original destination is busy, the call is redirected to the Intercept Routing—Busy destination assigned
through system programming. If no destination is assigned the caller will hear a busy tone.
The time modes that are selected for CO line calls arriving at extensions and UM groups are decided on a
tenant basis.
Intercept for calls to an outside destination
LCOT CO lines do not support this feature.
This feature may not be available depending on the specifications of the telephone network.
This feature is not available when the original call was made from a SIP extension.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters
→Dial / IRNA / Recall / Tone—Intercept Routing No Answer (IRNA)—Day (s), Lunch (s), Break (s),
Night (s)
→DISA / Door / Reminder / U. Conf—DISA—Intercept Timer—Day (s), Lunch (s), Break (s), Night (s)
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
→Overflow No Answer—Time out & Manual Queue Redirection—Destination-Day, Lunch, Break, Night
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
→Intercept Destination
→Intercept No Answer Time
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings
→Intercept Destination
→Intercept No Answer Time
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—DISA
Intercept—Intercept when all DISA ports are busy
18.4 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous
→Intercept—Intercept Routing - DND (Destination sets DND.)
→Intercept—Routing to Operator - No Destination (Destination is not programmed.)
→Intercept—Intercept Routing for Extension Call
PT Programming Manual References
[203] Intercept Time
[604] Extension Intercept Destination
[625] Destination for Overflow Time Expiration
Feature Manual References
5.1.10 DISA (Direct Inward System Access)
5.1.13 DND (Do Not Disturb)
10.1.13 Intercept Routing—No Destination
Description
Directs a CO line call to an operator when the call has no assigned destination.
Conditions
Intercept Routing—No Destination on/off
Document Version 2017-06
10.1.13 Intercept Routing—No Destination
Feature Manual
203

Advertisement

Table of Contents
loading

Table of Contents