Panasonic KX-NS700 Feature Manual page 200

10.1.12 Intercept Routing
Intercept Routing redirects calls to destinations based on the original destination of the call, as shown in the
table below. Different intercept destinations can be programmed for each time mode. Note that calls
redirected by Intercept Routing—No Answer/DND are directed to the same destination, while Intercept
Routing—Busy is directed to a separate destination, and the intercept destination for Intercept Routing—No
Destination is always an operator.
When the original destination is:
•
Wired Extension (PT/SLT/SIP Extension)
•
PS
•
ICD Group
•
UM Group
•
VM Group (DTMF/DPT)
•
DISA
*1
200 Feature Manual
The Available Intercept Destination is:
The destination assigned to the original extension.
12.1.1 PBX Configuration—[4-1-1] Extension—Wired
Extension—Extension Settings—Intercept
Destination
→
Intercept Destination—When called party does not
answer—Day, Lunch, Break, Night
→
Intercept Destination—When Called Party is Busy
12.2.1 PBX Configuration—[4-2-1] Extension—
Portable Station—Extension Settings—Intercept
Destination
→
Intercept Destination—When called party does not
answer—Day, Lunch, Break, Night
→
Intercept Destination—When Called Party is Busy
The ICD Group Overflow destination assigned to the
group. (→ 10.1.5 ICD Group Features—Overflow)
→ 11.5.1 PBX Configuration—[3-5-1] Group—
Incoming Call Distribution Group—Group Settings—
Overflow No Answer—Time out & Manual Queue
Redirection—Destination-Day, Lunch, Break, Night
The destination assigned to the first extension of the
UM group.
The destination assigned to the first extension of the
VM group.
If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
•
Disable: Busy tone is sent to the caller. When
using an analog CO line, a ringback tone is sent.
•
Operator: The call will be redirected to the
operator.
•
AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
→ 13.3.1 PBX Configuration—[5-3-1] Optional
Device—Voice Message—DISA System—Option 1
—DISA Intercept—Intercept when all DISA ports are
busy
Document Version 2017-06