Private Network Features-Qsig-Cf (Call Forwarding) - Panasonic KX-NS700 Feature Manual

15.1.20 Private Network Features—QSIG—CF (Call Forwarding)
Description
The PBX forwards the call to a destination extension in another PBX in the QSIG network. The destination
can be set on your own PBX on an extension basis as the forward destination of CO line calls (→
7.1.7 FWD (Call Forwarding)).
If the same trunk group is used for the incoming call and the forwarded call, the following situation will be
possible.
[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
•
This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
PC Programming Manual References
9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port—Supplementary Service—
COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
9.31 PBX Configuration—[1-3] Configuration—Option—New Card Installation—ISDN Standard Mode for
PRI23 Card
Operating Manual References
1.3.30 FWD (Call Forwarding)
Document Version 2017-06
15.1.20 Private Network Features—QSIG—CF (Call Forwarding)
QSIG
PBX-2
1
Call to 2000
2
Forwarded
to 1001
Extn. 2000
(Forward Destination
of CO Line Calls: 1001)
QSIG
PBX-2
Extn. 2000
Extension 1000 of PBX-1 dials
1
extension number "2000", and the call
is sent to extension "2000" of PBX-2
through QSIG network.
The call is forwarded to the forward
2
destination of CO line calls of
extension 2000, which is extension
"1001" of PBX-1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the forward destination of
extension 2000.
Feature Manual 299