Executive Busy Override - Panasonic KX-NS700 Feature Manual

6.1.7 Executive Busy Override

Conditions
•
A specified number of emergency numbers can be stored.
•
Emergency numbers may be called, regardless of Toll Restriction (TRS) level (→ 19.1.5 TRS (Toll
Restriction)), even when:
–
in Account Code—Forced mode (→ 2.1.2 Account Code Entry)
–
in Extension Dial Lock (→ 6.1.8 Extension Dial Lock)
•
CLIP Number Notification
When dialing an emergency number, the preassigned CLIP number for the extension will be sent as a
location identification number. (→ 4.1.15 CLIP (Calling Line Identification Presentation))
•
The CLIP number assigned to the extension will be sent regardless of the settings such as CLIR or CLIP
number assigned to an ISDN port to be used. This feature is only available when using a PRI line, with
E911-compatible services.
PC Programming Manual References
15.4 PBX Configuration—[7-4] TRS—Emergency Dial
PT Programming Manual References
[304] Emergency Number
Feature Manual References
23.1 Capacity of System Resources
6.1.7 Executive Busy Override
Description
Allows an extension user to interrupt an existing call to establish a three-party conference call.
Executive Busy Override Deny:
It is possible for extension users to prevent their calls from being interrupted by another extension user.
One-touch Executive Busy Override:
Extension users can perform Executive Busy Override by simply pushing the S-CO button of a call in
progress without entering a feature number. This feature can be enabled through system programming.
Caller Information before Executive Busy Override:
A PT/PS user, such as a boss, can confirm the caller information of a call to another extension using a DSS
button before performing Executive Busy Override.
After pressing the corresponding DSS button, and while hearing the busy tone, the user can check the
caller's information on the LCD. Then, the user can interrupt the call (Executive Busy Override), if
necessary.
Conditions
[General]
•
Class of Service (COS) programming determines the extension users who can use Executive Busy
Override and set Executive Busy Override Deny.
•
This feature will not function when the busy extension:
a.
Has set Executive Busy Override Deny or Data Line Security (→ 5.1.1 Data Line Security).
122 Feature Manual Document Version 2017-06