•
The following SLT ports and LCOT ports are connected during a power failure. It is possible to allow CO
line calls that are established during a power failure to be maintained even when the power returns and
the connection is switched back to the normal configuration from the Power Failure Connection.
–
Port 1 on the pre-installed MCSLC4 and port 1 and on the pre-installed PFT interface
–
Port 2 on the pre-installed MCSLC4 and port 2 and on the pre-installed PFT interface
Installation Manual References
4.12 Power Failure Connections
15.1.10 Predialing
Description
A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call
will be initiated after going off-hook.
Conditions
•
Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE
button (→ 18.1.10 Speed Dialing, Personal). In this case, the extension will enter personal programming
mode automatically so that a name can be assigned to the stored number.
Operating Manual References
3.1.2 Personal Programming
15.1.11 Printing Message
Description
An extension user can select a message to be output on SMDR. Up to eight messages can be
preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A
message can contain the "%" symbol, which requires a number to be entered in its place when the message
is selected at an extension.
Depending on the content of the preprogrammed messages, this feature can be used to record a variety of
information, which can be output on SMDR to, for example, a connected PC.
[Example]
If message 1 is preprogrammed as "Started work", and message 2 as "Finished work", employees can sign
in by selecting message 1 when starting work, and sign out by selecting message 2 when finishing. A
connected PC can then be used to generate employee work records.
Conditions
•
Up to seven "%"s can be stored for each message.
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features—Printing Message
14.2 PBX Configuration—[6-2] Feature—Hotel—Main—SMDR for External Hotel Application 2—Printing
Message 1–8
Feature Manual References
18.1.7 SMDR (Station Message Detail Recording)
23.1 Capacity of System Resources
Document Version 2017-06
15.1.10 Predialing
Feature Manual
261