Intercept Routing-No Destination - Panasonic KX-NS700 Feature Manual

2.1.1 Incoming Trunk Call Features
2.1.1.7 Intercept Routing—No Destination
Description
Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX).
Conditions
•
Intercept Routing—No Destination on/off
The Intercept Routing—No Destination feature can be enabled or disabled through system programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination feature
always functions for calls through the LCOT card even when disabled.
•
If an operator (tenant/PBX) is not assigned:
The extension that is connected to the lowest-numbered port and is ready to receive calls will be the
intercept destination.
•
Intercept Routing—No Destination also applies to calls from doorphones.
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM—
18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous—
No Destination (Destination is not programmed.)
PT Programming Manual References
[006] Operator Assignment
Feature Manual References
5.1.5 Operator Features
40 Feature Manual
PBX Operator—Day, Lunch, Break, Night
Intercept—Routing to Operator -