Appendix 4 Fb (Function Block) Insertion Procedure - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

Appendix 4 FB (function block) Insertion Procedure

The procedure for inserting FB is shown below.
(1) Click [View] → [Docking Window] → [Element Selection].
Click!
Go to next page
(2) The Element Selection window will appear.
Click the Module tab.
(3) Expand RD77MS4 of the displayed module FB,
and the FB list will be displayed.
PRECAUTIONS
If RD77MS4 is not displayed by expanding
Module FB, add RD77MS4 to the module
configuration. (Refer to Section 5.2.2.)
If the ladder editor is not displayed, it is impossible
to use any data in the list.
App-53
Click!