Parameters - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

6.5.2

Parameters

From previous page
Double-click!
Go to next page
(4) Set Axis #2 (d02) and Axis #3 (d03) as shown
below in accordance with the procedures in
Steps (2) and (3).
Servo Amplifier Series: MR-J4(W)-B (-RJ)
Amplifier Operation Mode: Standard
(1) Set parameters of the RD77MS4.
In the [Navigation window], select
[0000:RD77MS4], and double-click [Parameter].
(2) The RD77MS4 Parameter Setting screen
appears.
Set the parameters of each axis.
6-7