Table of Contents
Advertisement
1
FUNCTION BLOCK (FB) LIST
This chapter lists the FBs for the MELSEC iQ-F series positioning module.
*1
Name
M+FX5PG_SetPositioningData
M+FX5PG_StartPositioning
M+FX5PG_JOG
M+FX5PG_MPG
M+FX5PG_ChangeSpeed
M+FX5PG_ChangeAccDecTime
M+FX5PG_ChangePosition
M+FX5PG_Restart
M+FX5PG_OperateError
M+FX5PG_InitializeParameter
M+FX5PG_WriteFlash
M+FX5PG_ABRST
M+FX5PG_StartAddressOffsetPositioning
M+FX5PG_SetTimeOffsetPositioning
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name.
1 FUNCTION BLOCK (FB) LIST
2
Description
Sets positioning data (Da.1 to Da.10, Da.27 to Da.29).
Starts the positioning operation.
Performs the JOG operation or inching operation.
Performs the manual pulse generator operation.
Changes the speed.
Changes the acceleration/deceleration time during speed change.
Changes the target position.
Restarts an axis that has stopped.
Monitors errors and warnings, and resets errors.
Initializes parameters.
Writes positioning data and block start data in the buffer memory to the flash ROM.
Restores the absolute position.
The following axis starts after the preceding axis has started and moved the set movement amount.
The following axis starts after the set time has elapsed from the start of the preceding axis.
Advertisement
Table of Contents
