Mitsubishi Electric FATEC MELSEC iQ-R Training Manual page 414

Click!
Select!
Click!
Click!
From previous page
(5) Click "Md.103: Motor speed", "Md.104: Motor
Click!
(6) Sampling Setting screen appears.
(7) The trigger setting items will be displayed. Click
(8) Set the BIT trigger conditions as shown below.
Click!
App-64
current value" and "Md.20: Feed current value,"
and click to register them in the Item column.
After registering, click the
Specify the default settings as follows.
• Sampling Rate (ms): 0.888 × 4
• Sampling Size (Point): 8192
Click the "Trigger Setting" tab.
the button.
BIT
• Trigger Mode: Bit OR
• Ax. 1-Positioning start Pattern:
Click the button.
Complete
button.
Next
(OFF to ON (startup))