Mitsubishi Electric FATEC MELSEC iQ-R Training Manual page 233

From previous page
(4) Set the JOG speed arbitrarily. Touch the set value
of the axis JOG speed to be changed. The
numeric input window will appear.
(5) Input the JOG speed with the numeric keys.
The input range is shown below.
Axis No.
Axis 1
Axis 2
Axis 3
Touch
ENTER
reflected as the JOG speed.
(Then, the numeric input window will close.)
Perform the JOG operation as stated in (3), and
make sure that the JOG speed has been changed.
6-46
JOG speed setting range (mm/min)
1 to 1000
1 to 5000
1 to 3000
, and the input value will be