Test Operation - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

5.5

Test Operation

The home position return test and the test operation with written positioning data are
performed to check the operation of RD77MS.
For the Simple Motion Monitor, refer to Appendix 5.
Click!
Click!
Click!
Click!
Go to next page
(1) Click [Online] → [Test] of the Simple Motion
Module setting tool.
(2) The Test dialog box appears, press the
button.
(3) The Operation Axis Selection dialog box
appears. The axis selected in [Selectable Axis
No.] is moved to [Operation Axis and Display
Order] by clicking the
axes 1 to 3 to [Operation Axis and Display
Order], and click the
5-24
Yes
button. Move the
Add
button.
OK