Mitsubishi Electric FATEC MELSEC iQ-R Training Manual page 400

(7)
(8)
Click!
(9)
Click!
Click!
From previous page
(6) The screen will change to the Parameter Setting
screen. For the details of setting, refer to Section
5.3.2.
(7) Select the axis No. to set the parameters in step 1:
Select axis No.
(8) Click the
the basic parameters 1.
(9) The compute dialog box for the basic parameters
1 appears. After inputting the following values
(default values), click the
button to Compute the basic parameters 1.
Machine Configuration
Unit Setting
Lead of Ball Screw
Encoder Resolution
(10) The results of calculation of the basic parameters
(10)
1 will be displayed. Click the
Movement Amount per Pulse
appears, and the Movement Amount per Pulse
can be checked.
(11) Click the
(11)
(12) The dialog box shown on the left appears. Press
the
Yes
reflected in the basic parameters 1.
Go to next page
App-50
button in step 2: Set
Basic Parameters 1
Compute Basic Parameters 1
Ball screw, Horizontal
0: mm
2000.0 µm
4194304 pulse/rev
button, and a dialog box
button.
OK
button, and the calculation results will be