Simulation - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

5.3.5

Simulation

The simulation (virtual positioning) function is designed to confirm whether the set
positioning data including the operation pattern, control method, addresses and command
speed is appropriate.
PRECAUTIONS
The results of simulation of positioning from the address 0 are displayed.
Click!
Click!
5-20
(1) Click the
Offline Simulation
Positioning Data Setting screen.
(2) Offline Simulation window appears.
(3) The results of simulation with positioning data
No.1 are displayed.
(4) The positioning data of each axis can be
simulated by changing the number in
"0000:RD77MS4 Axis Positioning Start No." to
2, 3, ...
(5) To terminate the simulation, click the
button to close the offline simulation window.
button on the Axis 1
Close