Position Control Program - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

6.6

Position Control Program

The positioning control practice programs include various programs, such as initial
processing, JOG operation and home position return. Refer to the respective descriptions of
each program in this manual for details.
The RD77MS programs for operation have been created with GX Works3.
An explanatory drawing of the demonstration machine GOT operation panel is shown in
Section 6.3.2.
POINT
Setting of display of multiple comments
When the setting of display of multiple comments is enabled, the comments in the sequence
programs can be localized according to the displayed languages.
Click [View] → [Multiple Comments Display Setting] on the GX Works3 menu.
From previous page
6-14