5.4.2
Writing to the PLC
Write settings data to the CPU module.
POINT
If the data cannot be written to the CPU module, delete the data in the CPU module, and write it
again.
For the method for deleting data, refer to Appendix 2.
(1) Connect the personal computer and CPU module with the USB cable, and set the RUN/STOP/RESET
switch of the CPU module to STOP.
Check!
Click!
(2) Click [Online] → [Write to PLC...].
Click!
(3) An Online Data Operation dialog box appears.
Check the "Parameter " and the "Simple Motion
Module Setting:0000:RD77MS".
(4) Click the
Go to next page
5-22
button.
Execute