Mitsubishi Electric FATEC MELSEC iQ-R Training Manual page 317

Click!
(9) Reset the CPU module. (Hold the RUN/STOP/RESET switch on the RESET side.)
From previous page
Click!
Click!
Click!
7-66
(6) The dialog box for writing to the PLC appears,
and writing is started.
The message shown on the left appears, press
the button.
Yes to all
The message shown left is displayed in the
middle of writing. Click the
(7) After the completion of writing, the message
shown left is displayed. Click the
(8) Click the button in the Online Data
Close
Operation dialog box to close the dialog box.
button.
Yes
button.
OK