Appendix 7 Melsec Iq-F Series Simple Motion Module; Appendix 7.1 Major Features Of Melsec Iq-F Series Simple Motion Module - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

Appendix 7 MELSEC iQ-F Series Simple Motion Module

Appendix 7.1 Major Features of MELSEC iQ-F Series Simple Motion Module

(1) Modules for 4 axes and 8 axes are available.
iQ-F Simple Motion Modules for 4 axes and 8 axes are available.
• FX5-40SSC-S (for 4 axes)
• FX5-80SSC-S (for 8 axes)
(2) Basic positioning control
Positioning control can be realized by starting the point table type positioning data from
the sequence program.
The modules with various types of positioning control, e.g. linear interpolation, 2-axis
circular interpolation, fixed-feed and continuous path, are applicable to many uses.
(3) Synchronous/cam control
(a) Advanced synchronous control
This control uses software in place of mechanisms, such as gears, shafts,
clutches, transmissions and cams.
The synchronous control can be realized only by setting the parameters on GX
Works3.
Synchronous control output axes are moved with cams.
(b) Cam automatic generation
Cam data for rotary cutter is automatically generated.
Optimum cam data can be generated only by inputting the sheet length,
synchronous width and cam resolution to the device specified on the GOT
screen.
(4) Mark detection function
The actual current position of servo motor can be obtained when the register mark on
wrapping paper moving at a high speed is input to the sensor. Wrapping paper can be
cut in the predetermined position by correcting the cutter shaft position when the
register mark is input.
(5) Compatible with servo high-speed synchronous network SSCNETIII/H
(a) Communication speed is 3 times faster.
The module can transmit data 3 times faster (bidirectional 150 Mbps (equivalent
to unidirectional 300 Mbps)) compared to the conventional modules. It realizes
improved system responsibility, increased number of axes and wiring saving and
contributes toward improvement of equipment performance.
(b) Equipment performance improvement by synchronous communication
SSCNETIII/H enables completely synchronous communication. It realizes
improvement of performance of printers, food machinery, processing machinery,
etc. that require high precision synchronization.
(c) Connection of various drive units
The module can be connected not only to rotary servo motors, but also to linear
servo motors, direct drive motors, FR-A800 Series inverters and devices
produced by partner manufacturers.
App-66