Appendix 5 Simple Motion Monitor; Appendix 5.1 Starting The Monitor (In The Case Of Axis Monitor); Appendix 5.2 Stopping/Starting The Monitor - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

Appendix 5 Simple Motion Monitor

The parameters and error codes relating to all operation axes can be collectively monitored
from the Simple Motion setting tool. You can check the parameters and errors of each axis
during system operation.

Appendix 5.1 Starting the Monitor (in the case of Axis Monitor)

Appendix 5.2 Stopping/starting the Monitor

Double-click!
Click!
Click!
App-56
(1) In the [Navigation window] of the Simple Motion
setting tool, select [Module Monitor], and
double-click [Axis Monitor].
(2) The monitor starts up.
(1) To stop the monitor, click the "Stop Monitoring"
button on the Monitor screen toolbar.
(2) To start the monitor again, click the "Start
Monitoring" button on the Monitor screen
toolbar.