1
OVERVIEW
1.1
Function Block (FB) List
The following shows the list of FBs for using the cam output control function.
Item
M+CamCtr_CamOutput_F
M+CamCtr_CamOutputTable_F
M+CamCtr_AngleAdvFunc_F
1.2
Device Name
Device name
iQ-F FX5 series programmable controller
1.3
Procedure Overview
iQ-F Setting
Creating the program
*1 For details, refer toPage 27 IQ-F SETTING.
*2 For details, refer toPage 29 WIRING.
*3 For details, refer toPage 31 CREATING PROGRAMS.
1 OVERVIEW
2
1.1 Function Block (FB) List
Description
Turns on or off the cam output according to the input angle (count value).
Sets the angle for ON/OFF control of the cam output.
Sets the automatic angle advance.
Description
Use the FX5U CPU or FX5UC CPU module.
*1
Wiring
*2
*3
Parameter setting
• Fixed cycle setting
• Interrupt setting
Wiring procedure
• Wiring example
Program setting
• Library registration procedure
• FB arrangement
• Program application examples