Simple Motion Module Setting; Parameters - Mitsubishi Electric FATEC MELSEC iQ-R Training Manual

7.5

Simple Motion Module Setting

Set the parameters when performing practical work (traveling cutter and rotary cutter) with
the Simple Motion Module setting tool.
7.5.1

Parameters

(3) Specify Common parameters as shown below.
Double-click!
Go to next page
7-27
(1) Set parameters of the RD77MS4.
In the [Navigation window], select
[0000:RD77MS4], and double-click [Parameter].
(2) The RD77MS4 Parameter Setting screen
appears.