Appendix 6 Digital Oscilloscope
Position commands, position droop, motor speed, motor current and speed commands and
so on can be sampled by the digital oscilloscope of the Simple Motion Module setting tool
(GX Works3).
For the performance and specifications, refer to the Help (digital oscilloscope) for the Simple
Motion Module setting tool.
This appendix gives an example of measurement for address indirect specification
positioning of Axis 1 (refer to Section 6.8.6).
(1) Starting the digital oscilloscope
Double-click!
Click!
App-59
(1) In the [Navigation window] of the Simple Motion
Module setting tool, double-click [Digital
Oscilloscope].
(2) The assistant dialog box will appear. Click
(3) A Digital Oscilloscope window appears.
.
Close