Chapter 1 Function Block (Fb) List; Chapter 2 Input/Output Fb; M+Fx5Ucpu-Io_Outputontimes - Mitsubishi Electric MELSEC iQ-F FX5 Reference Manual

1
FUNCTION BLOCK (FB) LIST
This chapter lists the FBs for the MELSEC iQ-F series FX5U, FX5UC CPU module.
Input/Output FB
*1
Name

M+FX5UCPU-IO_OutputOnTimes

M+FX5UCPU-IO_CompareRelayOnTimes
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name
Positioning FB
*1
Name
M+FX5UCPU-Positioning_ABRST
M+FX5UCPU-Positioning_StartPositioning
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name
Serial Communication FB
*1
Name
M+FX5UCPU-SerialComm_InputOutput
M+FX5UCPU-SerialComm_Input
M+FX5UCPU-SerialComm_Output
M+FX5UCPU-SerialComm_ExeCommonProtocol
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name
High-speed Counter FB
*1
Name
M+FX5UCPU-Counter_PulseMeasure
*1 Note that this reference does not describe the FB version information which is displayed such as "_00A" at the end of FB name
Precautions
If upgrading module FB versions updates instructions, adds a new instruction, or adds a new device, please use the GX
Works3 corresponding to the latest module FB.
1 FUNCTION BLOCK (FB) LIST
2
Description
This FB counts (cumulatively) the number of ON times of the specified relay device number within the
range from 0 to 4294967295.
• This FB counts (cumulatively) the number of ON times of the specified relay device number within the
range from 0 to 4294967295.
• This FB compares the counted number of ON times with the set value, and outputs the comparison
result.
Description
This FB reads the absolute position (ABS) data from the servo amplifier, and writes the read value to the
current address (pulse unit) of the target axis.
This FB uses the table data set using the module parameters to activate the positioning operation.
Description
This FB stores the received data and sends the specified number of data points using non-protocol in
serial communication.
This FB stores the data received using non-protocol in serial communication.
This FB sends the specified number of data points using non-protocol in serial communication.
This FB executes the protocol registered with GX Works3.
Description
This FB starts the pulse measurement function, and stores the pulse measured value.