Table of Contents
Advertisement
Video Input panel
The Video Input panel, located on the projector side input panel (operator side), has a variety of ports
that can supply alternative video content to the projector.
ID
Port
A
HDMI input 1 and HDMI input 2
B
SDI input 1, SDI input 2, SDI input 3,
and SDI input 4
C
DisplayPort (DP1 and DP2)
D
Christie Link port
E
Software-Defined Video over Ethernet
(SDVoE) port
F
USB-C port
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Type A connector
HDMI v2.0 protocol supporting EDID 1.3 with HDCP v1.4 and 2.2
support
75 ohm Micro-BNC Connector
Multi-Rate SDI in accordance with SMPTE ST 259 (270 Mb/s), ST
292-1 (1.5 Gb/s), ST 424 (3.0 Gb/s), ST 2081-1 (6 Gb/s) and ST
2082-1 (12 Gb/s)
Accepts digital video data from DisplayPort 1.2 input with HDCP 1.3
support.
Not used.
Not used.
Connects the projector touch panel.
32
Advertisement
Table of Contents
