Chapter 6: Status, Fault, And Srq Registers; General; Scpi Language; Scpi Register Tree - TDK-Lambda G+1U 5kW User Manual
Built-in lan ( 1.5), usb, rs-232 & rs-485 interfaces built-in remote isolated analog program/monitor/control interface optional interface: is420, ieee488.2 scpi (gpib), modbus tcp or ethercat
Table of Contents
Advertisement
CHAPTER 6:
6.1
General
This section describes various status errors (faults) and SRQ register structures. The registers can
be read or set via communication commands. Two individual sets of registers are managed, one
set for the SCPI language, another set for the GEN language.
6.2
SCPI Language
6.2.1
SCPI Register Tree
STATUS, FAULT, AND SRQ REGISTERS
Figure 6–1: SCPI Register Tree Diagram
163
Advertisement
Table of Contents
