•
Subnet Mask
Displays the subnet mask assigned to the power supply through either DHCP, Auto-IP, or
Static IP.
•
Default Gateway
Address of the network router to allow the power supply to communicate outside of the local
subnet.
•
DNS Server
Address of the server running the Domain Naming Service. This is used for hostname
addressing.
•
Hostname
The power supply hostname may be used instead of the IP address to create a communication
link.
•
Description
By default, this is "TDK-LAMBDA Supply <Last 3 digits of the Serial Number>", but it may be
changed.
Controller Access
•
The "One Client Only" setting is the default setting for the highest networking security. This
setting allows only one TCP socket to be open at a time, it disables the connectionless UDP
sockets.
The multiple client setting is needed to allow more than one controller connection at a
time and to enable UDP sockets connections.
•
Multicast DNS
mDNS is a protocol which allows devices on a network to advertise and use hostname
addressing even if no DNS server is connected. This service may be disabled for security
reasons or just to reduce network traffic.
•
Modify
Click this button to open the window shown in the next section.
78