Table of Contents
Advertisement
No.
Control/Indicator
8
Power / Address Indicator
9
Ext V / Ext I Indicators
10
REM Indicator
11
RS Indicator
12
USB Indicator
13
LAN Indicator
14
OPT Indicator
15
TRIG Indicator
16
Active Memory-Cell
Indicator
Description
If power supply output is ON, actual output power is displayed.
If power supply output is OFF, power supply address is displayed.
* The address is displayed while Communication menu is active, regardless
of the power supply output state.
External Voltage / External Current Analog Programming Indicators.
Ext V is on if Analog Voltage Programming channel is active.
Ext I is on if Analog Current Programming channel is active.
REMOTE indicator.
REM is on if power supply is controlled by a remote communication
(RS232/485, USB, LAN, OPTional).
Recommended Standard indicator.
RS232 or RS485 communication type is selected.
Universal Serial Bus indicator.
USB communication type is selected.
Local Area Network indicator.
LAN communication type is selected.
Optional communication type indicator.
Optional communication type is selected.
Trigger Indicator.
TRIG is on if the trigger-in is enabled and initialized.
Power supply is ready to receive trigger-in signal.
Display active memory cell.
1,2,3,4 – A sequence is loaded from cells 1,2,3, or 4
_ - A sequence is loaded from a PC
The indicator is blinking if a sequence is running.
Table 1-2: Front Panel Display and Indicators
6
Advertisement
Table of Contents
