Table of Contents
Advertisement
7.9
Communication Example
This section provides an example of how to communicate with the IEEE option
supply using the National Instruments™ MAX application.
1.
Run the National Instruments™ MAX (Measurement & Automation Explorer).
2.
On the side tree, expand My System and select Devices and Interfaces -> "GPIB0".
3.
In the GPIB Explorer toolbar, click Scan for Instruments. Refer to Figure 7–4.
4.
On the side tree, select
settings. Refer to Figure 7–5.
5.
In the GPIB Explorer toolbar, click Communicate with Instrument.
NI-488.2 Communicator appears. Refer to Figure 7–6.
Figure 7–3: National Instruments™ MAX – Desktop Icon
Figure 7–4: Scan for Instruments
Figure 7–5: Instrument Properties
instrument (i.e., G30-170-GPIB) and review the device
179
power
Advertisement
Table of Contents
