TDK-Lambda G+1U 5kW User Manual page 135

[SOURce]:CURRent:EXTernal:MODE <DSC>
Function
Sets the current programming source: Front panel/Communication (Digital),
external voltage, or external resistor.
Parameter 0|1|2 or DIG|VOL|RES
Query [SOURce]:CURRent:EXTernal:MODE?
Return <DSC> DIG|VOL|RES
[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Function
Sets a digital programming output current value.
Parameter
The range is limited by the power supply model
Unit
A
Query
[SOURce]:CURRent[:LEVel][:IMMediate][:AMPLitude]?
Return
<NR2> 5-digits format
Example
:CURR? returns the present programmed current level.
:CURR? MAX and :CURR? MIN return the maximum and minimum
programmable current level.
[SOURce]:CURRent:SLEW:DOWN <NRf+>
Function
Sets a digital current reference down programming slew rate.
Parameters
0.0001–999.99
Unit
A/mS
Query
[SOURce]:CURRent:SLEW:DOWN?
Return
<NR2>
Example
:CURR:SLEW:DOWN 1 sets digital current reference down programming
slew to 1A/mSec.
:CURR:SLEW:DOWN? returns a digital current down programming slope
value.
:CURR:SLEW:DOWN? MAX and :CURR:SLEW:DOWN? MIN return the
maximum and minimum digital current reference down programming slope
value.
[SOURce]:CURRent:SLEW:UP <NRf+>
Function Sets a digital current reference up programming slew rate.
Parameters 0.0001–999.99
Unit A/mS
Query [SOURce]:CURRent:SLEW:UP?
Return <NR2>
Example :CURR:SLEW:UP 1 sets a digital current reference up programming slew to
1A/mSec.
:CURR:SLEW:UP? returns a digital current up programming slope value.
:CURR:SLEW:UP? MAX and :CURR:SLEW:UP? MIN return the maximum and
minimum digital current reference up programming slope value.
120