MAN-10152-01 for software v2.5
Administration Menu
W
R
ARNING
ESET
If the GeoMx System detects a potential problem, it may
issue a Warning Symbol on the footer of the GeoMx
DSP Control Center
(see Figure 94)
symbol reveals any codes associated with the current
state of the system. If encountering a warning on your
system, contact GeoMxSupport@nanostring.com. At the instruction of a NanoString support
scientist, you may reset the warning light by navigating to Warning Reset under
Administration and clicking the Reset button.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
GeoMx DSP Instrument User Manual
. Clicking on this
Figure 94: Warning symbol
99