Table of Contents
Advertisement
MAN-10152-01 for software v2.5
Administration Menu
5. Click Confirm.
6. The Notification Bell in the Control Center will inform when export is complete.
IMPORTANT:
an export in progress with a new export could result in overwriting files.
Importing GeoMx folders, scans, and studies
1. Plug the external drive into the GeoMx instrument's USB port. Log into the GeoMx system
as an administrative user.
2. Click on Data Exchange from the Administration menu. Within the Data Exchange window,
navigate to the folder into which you would like import.
3. Once the desired folder has been highlighted, click Import.
4. View available external drives. Select a drive. Click Confirm.
5. The system will display all GeoMx files found on the
selected drive. Highlight the desired file and click Select,
then Confirm
(see Figure
6. The Notification Bell in the Control Center will indicate when import is complete.
7. If an imported folder does not display both slides and studies, right click on the folder, select
Edit, and click Save. The slides will then display.
NOTE: If data already exists on the instrument in one folder location, and you try and import
again to a new folder location, the new location will not be populated with the data.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
Allow the export to fully complete before starting a new export. Interrupting
66).
GeoMx DSP Instrument User Manual
Figure 66: Select Import File window
77
Advertisement
Table of Contents
