Create Slides And Scans Outside Geomx Dsp Workflow - nanoString GeoMx DSP User Manual

GeoMx DSP Instrument User Manual
Create Slides and Scans
Create Slides and Scans outside GeoMx DSP Workflow
Create a New Folder
You can create folders where you can organize slide records, scan cards, and analyses.
1. Select the Records button in the DSP Control Center
2. This will open the Navigation window. Open a parent folder, if needed.
3. Click the New Folder button at the top of the Navigation window.
4. The system will prompt you for the following information:
Folder Name
l
Folder Description (optional)
l
Groups
l
5. Select Save to save the new folder.
Create a New Slide record
1. Select the Records button in the DSP
Control Center.
2. This will open the Navigation window.
Open or create a new parent folder.
3. Click the New Slide button at the top of
the Navigation window.
4. The Creating new slide record window
will appear to the right of the Navigation window. Fill in:
Slide Label: the unique identifier for this physical slide.
l
Barcode (optional)
l
Description (optional)
l
5. Select Save New Slide.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
66
MAN-10152-01 for software v2.5
(see Figure 55).
Figure 55: Records button and Navigation window