Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Select ROIs & Segment
Move and Adjust ROIs
Select the select/edit ROI button (arrow icon) from the Scan Workspace
click on the ROI you'd like to edit.
Click and drag the center point of the shape to move it.
l
Click and drag a white perimeter point to resize the shape.
l
Copy and Paste ROIs by holding down the control button (Ctrl) on the keyboard and clicking
l
and dragging the center point of an existing ROI. Release the click to place the new ROI(s).
Select multiple ROIs by pressing Shift and then clicking the center of the desired ROIs.
l
To delete the ROI(s), click the Delete or Backspace button on your keyboard. You can also
l
click the red X in the ROI List (see next step). To delete all ROIs in the scan workspace, select
an ROI in the ROI List, then press Ctrl+A, then press Delete or Backspace.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
42
MAN-10152-01 for software v2.5
(see Figure 28)
Figure 28: Scan
Workspace select
ROI button
and
Advertisement
Table of Contents
