Table of Contents
Advertisement
MAN-10152-01 for software v2.5
Start a New Run
Insert the Slide Holder
Find information on loading the slides into the slide holder
on
page 22.
Load the slide holder onto the stage of the instrument
l
(see Figure 16)
when prompted.
Inspect visually and by touching to ensure that the slide
l
holder fits evenly in the frame of the stage.
The green slide numbers should be closest to the front of
l
the machine.
Select Next.
For information on removing the slide holder, see
The system will detect the necessary components for the run. It will then proceed to
Slides on page
28.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
GeoMx DSP Instrument User Manual
Figure 16: Insert the slide holder onto
the stage of the instrument when
Removing the Slide Holder on page
prompted
60.
Identify
27
Advertisement
Table of Contents
