Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Administration Menu
S
B
YSTEM
ACKUPS
Once an administrative user has provided a network path for archiving (see
on page
79), the system will automatically start archiving data and performing backups. The
dates and location of system backups will be listed here. The list may not include all
successful system backups; check the external archive location to view all archived files.
S
S
YSTEM
ETTINGS
Through the System Settings menu, you can shut down the instrument (see
page
104) or change the system time.
Your GeoMx instrument (and, if applicable, the paired auxiliary server) rely on having accurate
date and time settings to establish secure connections. NanoString recommends setting the
internet time server as follows:
1. Log into the GeoMx DSP system as an administrative user.
2. From the Administration menu, click on System Settings, then System Time. The System
Time window will open
3. Check the box for Synchronize with Internet Time (NTP) Server.
4. Enter ntp.ubuntu.com into the Time Zone Server field.
5. Select the appropriate time zone for your location.
6. Click Save Changes.
If the dialog box indicates the time server is Local CMOS Clock, then the specified time
server cannot be reached. Please check with your network administrator to allow outbound
network traffic from your GeoMx DSP and auxiliary server to the address ntp.ubuntu.com. If
it's not possible to use ntp.ubuntu.com, select an alternative time server that you can
successfully connect to.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
96
(see Figure
91).
Figure 91: System Settings - System Time
MAN-10152-01 for software v2.5
File Management
Shut Down on
Advertisement
Table of Contents
