Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Approve ROIs
Once the GeoMx DSP System has begun to
collect from a slide, its ROIs can no longer be
modified and the Modify button will not be
available.
If the collection plate becomes full, the GeoMx DSP instrument will pause and display prompts
instructing how to change the collection plate
automatically proceed following the plate change, log out (Ctrl Alt Del) and log in again.
NOTE: if placing a new plate for a collection with NGS readout, do not swap to a plate that was
previously partially used for nCounter platform aspirates.
When all ROIs for each slide have been collected, the system will move on to the next step,
Unload Plate and Slides on page
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
58
(see
Figure 46)
59.
MAN-10152-01 for software v2.5
Figure 45: Scan status messages and buttons
. If collection does not
Figure 46: Plate Change notifications
Advertisement
Table of Contents
