Table of Contents
Advertisement
GeoMx DSP Instrument User Manual
Instrument Introduction
To access the GeoMx DSP instrument stage, open the main (upper) door. On the stage a
collection plate is loaded into the plate holder and secured by the plate clamp. When loading a
collection plate before your slides, the system will prompt you to slide the plate cover over the
collection plate until loading is complete. Up to four slides can be loaded into individual slots on
the slide holder in a designated lab space, each is secured with the slide slot clamps, and
covered with buffer. The slide holder is then placed onto the stage of the instrument.
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
10
Figure 3: GeoMx DSP instrument interior diagram
MAN-10152-01 for software v2.5
Advertisement
Table of Contents
