nanoString GeoMx DSP User Manual page 84

GeoMx DSP Instrument User Manual
Administration Menu
M M
ANAGING EMBERS
1. Once on the Group Management tab under Administration, click the Manage button
next to the group of interest.
2. The group membership window will appear, listing the available users and the current
members in the group
To add an available user to the group, highlight them in the Available Users field and
l
select the Add Users button.
To remove a user from the group, highlight the individual in the Users in Group field
l
and select the Remove Users button. A confirmation message will appear; select
Save to complete the removal.
I T
DLE IMEOUT
Set the idle timeout setting for users. The default is 20
minutes; the setting can be changed to up to 1439 minutes
(see Figure 73).
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
84
(see Figure 72).
Figure 72: User group management window
MAN-10152-01 for software v2.5
Figure 73: Idle Timeout setting