Table of Contents
Advertisement
MAN-10152-01 for software v2.5
Create Slides and Scans
Associate the Slide Record with Scan Parameters
1. If the selected slide record does not yet have a set of scan parameters associated with it, the
Scan Card will simply read, "No scans associated with this slide"
associate scan parameters with this slide record, click the Add Scan button in the Slide
Record window.
2. The Scan Parameters window opens
following the instructions in
FOR RESEARCH USE ONLY. Not for use in diagnostic procedures.
Figure 56: Slide record under Records in GeoMx DSP Control Center
(see Figure
Scan Parameters on page
Figure 57: Scan Parameters
GeoMx DSP Instrument User Manual
(see Figure 56)
57). Proceed to fill in scan parameters
31.
. To
67
Advertisement
Table of Contents
